reaction zone
英 [riˈækʃn zəʊn]
美 [riˈækʃn zoʊn]
网络 反应区; 反应带; 反应区域
双语例句
- Survey on responsiveness of Huzhou urban and rural health system stacked reaction zone
湖州市城乡地区卫生系统反应性调查 - Computations are done on flow configurations that resemble the reaction zone in the scramjet combustor flows.
本文通过数值模拟得到了超燃冲压发动机燃烧室化学反应流流场的流动结构。 - A two reaction zone reactor for laser synthesis of powder was proposed.
提出了双反应区的新构思，研制出双反应区激光制粉实验装置。 - In experiments, if smoldering propagated to the end, the transition to flaming combustion would occur for plenty of outer oxygen entering the reaction zone.
如果阴燃能传播到材料末端，外界的大量氧气进入阴燃区将使其向明火发生转化。 - Long-term continuous operation by introducing stored top tape double tape feeder, motorized tape feeder, and tape splicing tool. stacked reaction zone
通过采用双卡式料架，电子马达式料架，编带连接治具，实现长时间不间断连续生产。重叠式反应段，连续再生式反应段 - Wherein, an electrode system and a reaction zone are arranged on the base plate;
其中，于基板上设置一电极系统及一反应区。 - Electrical Conductivity and Reaction Zone Width Measurement of Detonation Process for Cast TNT/ RDX Compositions
铸装TNT/RDX爆轰过程导电性及反应区厚度实验 - Study on the function of the second reaction zone in MIP PROCESS
第二反应区在MIP工艺过程中所起作用的研究 - Study on adding catalyst in the second reaction zone of MIP PROCESS
MIP工艺第二反应区补加催化剂作用的研究 - The results showed that reaction temperature, catalyst type, feedstock properties and catalyst charge in the secondary reaction zone all have influence on MIP catalytic cracking process.
结果表明：反应温度、催化剂类型、原料油性质、第二反应区催化剂藏量等是影响MIP催化裂化技术的主要因素； - The effective reaction zone model of catalyst pellets is applied to describe the performance of catalyst pellet.
将有效反应区概念引入催化剂颗粒级设计中，用来分析由于反应与传递交互作用所引起的一类问题&在实际体系中，催化剂颗粒内可能存在有效反应区和死区的情形。 - By measuring the temperature at different positions in the reaction zone and using high speed photography, the property of propagating flames in gas explosion was investigated.
采用高速摄影法及通过对爆炸反应区内不同部位温度的测量，对瓦斯爆炸传播火焰的特性进行了试验研究。 - After detailed research for sintering process, the whole sintering process is divided into three stages of formation, movement and disappearance of reaction zone.
本文深入研究了烧结过程的特点，将从点火开始到烧结结束的整个过程分成反应带形成阶段、反应带移动阶段和反应带消失阶段； - C3S and C12A7 is formed by reaction of MgO-CaOwith steel slag in the reaction zone;
在试用中，镁钙材料与钢渣反应生成的主要产物为C3S和C12A7； - The combustion wave is divided into three zones including condensed reaction zone, dark zone and gas reaction zone.
GAP／AN推进剂的燃烧波可以分为凝聚相反应区、暗区、气相反应区。 - The distribution of intermediate products in the explosion reaction zone is also non uniform.
在瓦斯爆炸反应区内，中间产物的成分沿管道横断面分布也不均匀&管道中、上部是发光较弱的气体产物，放热量较大； - According to the distribution of heat and mass in furnace, the temperature area in furnace is divided into crystal zone, reaction zone and preheating zone, and the equation of different area is obtained.
根据合成炉内物质和温度分布的特点，将炉内的温度区域划分成结晶区、反应区和预热区，并给出不同区域的温度分布方程。 - According to the modified model, the detonation parameters are calculated and analyzed in the reaction zone of PO spray in air and the CJ plane.
对已有模型进行了改进，计算和分析了PO云雾爆轰的反应区和CJ面上的爆轰参数。 - The secondary reaction of the pyrolysis oil vapor in higher pyrolysis temperature or prolonged residence time in the reaction zone was discussed.
通过对热解油化学组成的全面分析，讨论了轮胎热解反应，尤其是较高热解温度和较长气相停留时间下的二次热解反应途径。 - The pressure of the detonation reaction zone is also wavy.
爆轰反应区实际总的压力也呈波状分布。 - The form mechanism of the reaction zone and the mixed structure have been analysed.
分析了反应区和混合组织的形成机制。 - The microstructures in the interface reaction zone of explosively welded L2/ 16MnR have been studied by using TEM, SEM and EDS.
用SEM、EDS、TEM对L2／16MnR爆炸焊接界面反应区进行了研究。 - For plane detonation, study the numerical method computing the detonation reaction zone.
首先研究一维平面爆轰反应区的求解方法。 - Brazed-fusion welded joint can be divided into fusion zone, interface reaction zone and zinc-riched zone.
熔-钎焊接头可分为熔化区、界面反应区和富锌区。 - This indicates that thermal decomposition of RDX cause by the shock effect and the oxidation of the fuel and oxygen reaction can be mutually coupled to form a reaction zone so as to maintain a higher pressure and the propagation velocity of the wave front.
表明炸药RDX在激波作用下受热分解反应和燃料与氧气的氧化还原反应可以相互藕合组成化学反应区，进而维持一个更高压力和更快传播速度的波阵面。 - The interfacial transition zone is composed of two regions, the interlayer diffusion reaction zone and the steel side diffusion reaction region.
Al2O3-TiC／钢扩散焊接头存在组织特征不同于两侧基体的扩散焊界面过渡区，界面过渡区由两个区域组成：中间层扩散反应区和钢侧扩散反应区。 - The cell activation of discharging with small current density improved the three reaction zone and Nafion distribution in the electrode to enhance the electrochemical active surface area.
通过小电流活化膜电极，改善了电极三相反应区域和Nafion的分布状况，从而提高了催化剂的电化学活性面积。 - Under the micro-stream discharge plasma condition, the temperature distribution in hydrolysis plasma reaction zone and the thermal effect of corn stalks hydrolysis are studied.
研究了微流注放电条件下玉米秸秆等离子体水解反应区温度分布以及秸秆水解反应热效应。